Its the numbering of the switches in the stack. The 3750 switches are Stackable. So if you add another switch to the stack using the Stackwise Cable, you will see something like this.

The stack cabling creates a high bandwidth backbone if you will between the switches, creating a virtual switch out of the multiple connected switches. Bandwidth on this backbone will vary depending on …

2) Access layer switch stacks located throughout building to ensure runs of less than 100m to clients. 3) The first and last switch in the stack ring have two uplinks each to the distribution layer. These are …

Feb 11, 2025 · You are right from what i recall the cisco.ios.ios_facts returns the serial number of the active switch in a stack. So for you to get serial numbers of all stack members, you need to use the …

Auto-copy automatically copies the software image running on any stack member to the new switch to automatically upgrade it. Auto-copy occurs if auto-upgrade is enabled, if there is enough flash …

If the switch stack does not contain a provisioned configuration for a new switch, the switch joins the stack with the default interface configuration. The switch stack then adds to its running configuration …

I am failing to find anything on this specific topic, and with my limited knowledge on my lab I am unable to determine this, does using 2 stackwise cables to connect 2 switches allow for doubling of …

A switch stack is a set of up to nine stacking-capable switches connected through their StackWise Plus or StackWise ports. You can connect only one switch type in a stack, or you can connect a mix of …

Feb 10, 2025 · The first switch to boot up is assigned Switch ID 1 and it will be the active switch in the StackWise Virtual domain. The second switch to reboot becomes the standby switch is and assigned …

Jul 29, 2022 · In an attempt to break the stack I have tried the "#no switch 2 provision" command but I get " Error: A switch is already physically present at this location". I have also tried renumbering the …